Designed to provide a motorised shaft which is mounted between 2 bearing housings complete with spherical roller bearings and taper sleeves.

The centrally driven shaft runs through a stuffing box and a pressurised chamber which can be charged with water via a bucket pump. The other side of the chamber has a mechanical seal arrangement.

The unit comes complete with its own start stop isolator panel and is driven by a 110v motor with V-Belt and Pulley arrangement.

It is mounted on a box section frame with swivel, lockable, non-marking castors.

The moving parts are guarded with clear PETG covers which allow the rig to be viewed whilst in operation.